Sig Sauer MPX/MPC - HPA/Air Pressure 0.8L Upgrade Kit
88S3-HP04
-
14-day right of withdrawal and return policy.
-
We deliver to all EU countries within 1–5 days!
-
Duties and taxes included
Remote line kit for Sig Sauer MPX / MCX – tank, adapter, regulator, remote hose – 0.8L
Simple setup: connect the tank to the hose, then connect the hose to the rifle. The tank can, for example, be stored in a backpack, allowing you to use the rifle as a compressed-air PCP without having a tank getting in the way. With this kit, you not only get more shots per fill—the shots will also be more accurate.
The hose and remote line are separate and connect to each other, so you don't have to remove the stock each time. All you need to do is simply click the remote line (the black hose in the picture) onto the red hose in the picture, and the rifle is disconnected from the tank—it's as easy as that!
All you need besides this is something to fill the tank with, such as PCP Pump/Compressor. We recommend a compressor for such a large air tank!
CO2 and compressed air – What’s the difference?
The first and biggest difference is that compressed air is considerably cheaper in the long run than CO2. Compressed air is also not affected by temperature differences in the same way as CO2—if it’s below 15 degrees, the performance of CO2 can be significantly reduced. Compressed air maintains a more consistent muzzle velocity with less variation, resulting in better accuracy.
Fast-Flow regulator and adapter – 1100 psi
Comes with a fast-flow actuator regulator that outputs 1100 psi. This tried-and-tested system lets you shoot rapidly without losing power or muzzle velocity.
The included adapter lets you use an air tank (included) or a CO2 paintball tank (not included)
- We recommend adding a few drops of silicone to the adapter between each fill (see pictures). DO NOT overfill with oil!
What's included in the set
- 0.8L 3000 psi air tank
- Regulator
- 88g adapter -> Paintball threads
- Hose
- Remote line with slide check
IMPORTANT INFORMATION
- We recommend adding one or two drops of silicone oil to one of the holes in the adapter between each fill to maintain the system. DO NOT overfill!
- The rifle is designed for CO2, and CO2 pressure can vary significantly. Installing other regulators/tanks or modifying the rifle in any way yourself may damage the rifle.
The rifle is designed to withstand:
CO2 @ 22ºC ≈ 855 PSI
CO2 @ 30ºC ≈ 1050 PSI
- Rifle shown in the picture is NOT included
Here you can find
- Sig Sauer MCX and Sig Sauer MPX
The customer purchases the goods at their own risk and is responsible for complying with all local legal requirements regarding the purchase, possession, use, or transport of the goods available in the online store.
This includes, but is not limited to, ASG (softguns), air rifles, and paintball replicas, which may be subject to specific regulations concerning weapons and ammunition.
Restrictions on the purchase, possession, use, or transport of these goods may apply in the destination country, and the seller assumes no responsibility for this. Any fees or costs (including administrative fees, validation, taxes, and customs duties) are the customer's responsibility.
The use of ASG (softguns), air rifles, and paintball replicas requires appropriate safety measures and caution. These products are not intended for persons under 18 years of age.
